Encore SP201-SA Manual de usuario descargar pdf (Pagina 8)

8 SP201-SA™ Installation Guide

E.2 Channel Configuration for R1 Signaling

What the terminal displays What you type What you are configuring

user> config r1 all

All R1 channels

Set 1/1 thru 2/31 out-of-service?

(y or n) : <current=n> n

Placement of channels 1–31 of

trunk 1 and (on the four-port

SP201-SA) channels 1–31 of

trunk 2 into service

Template # for default IAM ? :

(range 1 - 5) : <current=1> 1

Use of R1 IAM template 1

Template # for default ACM ? :

(range 1 - 5) : <current=1 1

Use of R1 ACM template 1

Include Feature Group D (caller ID/

ANI)? (y or n) : <current=n>

y (or n if caller ID is

not required)

Request for caller

identification

(The following four questions appear only if you

answered y to the previous question.)

Use 911-Operator Services Signaling

(y or n) : <current=n> n

No use of 911 support

Max nbr of ANI digits to send R1 (0 =

all) ? : (range 0 - 32) : <current=0> 0 (zero)

Support for ANI of any size

Are Information digits supported? (y

or n) : <current=n> n

No support of Information

digits

Separate Wink required for B-Party

Number? (y or n) : <current=n> n

No separate wink for B-Party

Require wink at end of selection?

(y or n) : <current=n> n

No wink required at end of

selection

Generate ringback tone for R1

originated calls? (y or n) :

<current=n> n

No ringback generated for

caller

user>

(Standard configuration for

R1 signaling has been

completed. If y

ou wish to

configure other parameters for

R1 signaling, refer to the

SP201-SA Customization and

Maintenance Guide

.)

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Comentarios a estos manuales

Sin comentarios