Encore SP201-SA Manual de usuario descargar pdf (Pagina 10)

10 SP201-SA™ Installation Guide

E.4 Channel Configuration for N5 Signaling

What the terminal displays What you type What you are configuring

user> config n5 all

All N5 channels

Set 1/1 thru 2/31 out-of-service?

(y or n) : <current=n> n

Placement of channels 1–31 of

trunk 1 and (on the four-port

SP201-SA) channels 1–31 of

trunk 2 into service

Destination country code for calls to

N5 (current) :

Enter up to 3 digits: (your country code)

Your country’s international

dialing code

Transit calls to N5 enabled ? (y or

n) : <current=n> n

Disallowance of transit traffic

Use Calling Party Category to set N5

language digit? (y or n) :

<current=n> n

No use of the calling party

category to derive the

language digit

N5 side outgoing language digit

(current) :

Enter up to 1 digits:

(Press Enter to leave

this field empty.)

The fixed language digit for

calls originating from the N5

side

Prefix to be stripped from digits

before sending to N5 (current) :

Enter up to 3 digits:

(Press Enter to leave

this field empty.)

Digits to remove from the

front of the country code

Digits that cause C11 to be sent to

N5 (current) :

Enter up to 18 digits:

(Press Enter to leave

this field empty.)

Digit string that causes the

C11 operator code to be sent

to N5

Digits that cause C12 to be sent to

N5 (current) :

Enter up to 18 digits:

(Press Enter to leave

this field empty.)

Digit string that causes the

C12 operator code to be sent

to N5

Language digit expected from N5 [* =

any] (current) :

Enter up to 1 digits:

(Press Enter to leave

this field empty.)

Acceptance of calls only with

a specific language digit (if

entered)

Transit calls FROM N5 enabled ? (y or

n) : <current=n> n

Rejection of transit calls (by

returning a busy flash)

Digits to prepend in non-transit

calls coming from N5 (current) :

Enter up to 3 digits:

(Press Enter to leave

this field empty.)

Digits to prepend to non-

transit calls

Use calling party category from

template ? (y or n) : <current=n> n

Derivation of the Calling

Party Category from the N5

language digit

Digits to send when C11 is received

from N5 (current) :

Enter up to 18 digits:

(Press Enter to leave

this field empty.)

The digit string to send when

the C11 operator code is

received from N5

Digits to send when C12 is received

from N5 (current) :

Enter up to 18 digits:

(Press Enter to leave

this field empty.)

The digit string to send when

the C12 operator code is

received from N5

1 2 ... 5 6 7 8 9 10 11 12 13 14

Comentarios a estos manuales

Sin comentarios