Encore SP201-SA Especificaciones descargar pdf (Pagina 45)

Monitoring and Troubleshooting the SP201-SA Software 7-45

SP201-SA™ Customization and Maintenance Guide

3 Type the point code, in the format x-y-z, and press Enter.

Note: We recommend the default (that is, not typing a point code),

so that the trace will accept transmissions from all point codes.

If you want to use a point code, the system will filter transmissions

to accept messages only from the point code you enter.

Note: Get all point codes from your network administrator.

 The following prompt appears.

4 Type the number of the CIC you wish to trace, and press Enter.

 The following prompt, for message type, is displayed:

5 Do one of the following:

a If you know the code for the message type you wish to trace, go to

Step 6.

b If you wish to abandon the trace, type exit and press Enter.

Point Code :

CIC :

Message Type (enter "?" for list):

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 55 56

Sin comentarios

Encore SP201-SA Especificaciones Pagina 45